
Stucco & stone in Calgary
Stone columns, wainscots and accent walls paired with stucco for a finished, high-end exterior.
Stucco and stone together give a Calgary home a finished, high-end front: stone columns at the entry, a wainscot along the base, an accent wall around the garage.
We handle both the stone and the stucco, so the joint between them, which is where most stone fronts fail, gets done properly.



Good reasons to add or redo stone
- You're building new and the plans call for stone accents
- You want to dress up a plain stucco front
- Your entry columns look bare or dated
- Stone pieces are loose, cracked or falling off
- There are gaps or stains where the stone meets the stucco
- You need new stone to match on an addition
Where stone and stucco go wrong in Calgary
The weak point on most stone fronts isn't the stone. It's the transitions: where stone meets stucco, where it meets a window, and where the wainscot sits on the foundation. If water gets behind those joints, Calgary's freeze-thaw cycles push the stone off the wall one piece at a time.
On some homes the top of the stone wainscot was never capped or flashed, so water runs straight in behind it. We plan those details before the first stone goes up.
How a stucco and stone job in Calgary comes together
- Plan the layout. We mark where the stone stops and the stucco starts, and how each transition will shed water.
- Prepare the wall. Moisture barrier, flashing and lath go on behind the stone areas.
- Set the stone. Stone is set on a scratch coat, with pieces cut to fit around corners and openings.
- Cap and seal the transitions. The top of the wainscot is capped, and the joints where stone meets stucco or windows are sealed.
- Finish the stucco. The stucco is finished to meet the stone in a clean, straight line.
- Cleanup and walkthrough. Mortar and dust are cleaned off the stone and the site, then we walk it with you.
What drives the cost of stone work
Stone is priced on the area and the detail, plus the stucco around it:
- Square footage of stone: a pair of columns versus a full wainscot across the front.
- Type of stone: manufactured and natural stone differ a lot in cost and weight.
- Corners and cuts: columns, arches and window returns take more cutting and fitting.
- Height and access: stone above the first storey needs scaffolding.
- Existing wall: removing old stone or repairing the wall behind it.
We'll price your layout at a free on-site estimate.
Stucco and stone projects

Stucco and stone, front elevation
Stucco & stone · Calgary

Stucco and stone columns
Stucco & stone · Calgary

Stucco and stone, side elevation
Stucco & stone · Calgary
Stucco and stone homes we've finished in Calgary. For the stucco on its own, see stucco installation. If it's cracked stucco next to the stone, that's stucco repair. You'll find more Calgary work, infills included, on the Calgary page.
Where we do this work:
Stucco & stone questions
Can you match my existing stone?
We source the closest match available.
Can you add stone to a house that's already stucco?
Yes. The stucco is cut back where the stone will go, the wall is prepared, and the stone is set and finished into the stucco around it.
Do you fix loose or fallen stone?
Yes. We reset loose pieces and find out why they let go, which is usually water getting in behind them.
Manufactured or natural stone?
Both can look great. Manufactured stone is lighter and comes in consistent sizes. Natural stone is heavier and costs more. We'll go over options at the estimate.
Why is there a gap between my stone and stucco?
The sealant at the joint has dried out, or the two materials have moved. An open joint lets water behind both, so it should be cleaned out and resealed.
Can stone go on a garage or shop?
Yes. Stone wainscots and columns on garages and shops are common, especially when the house already has stone and you want them to match.
Request sent
Thanks. Zere will call or text you back today. Urgent? Call (403) 617-2955.